[Surface treatment] Powder metallurgy

17/11/2026

Powder metallurgy (PM) is a technology most people have heard of, but few understand its manufacturing process. Although it involves only a few steps, every detail is crucial; even the slightest oversight can cause problems with the workpiece.

Here, we'll use diagrams to help you understand the powder metallurgy process and related information!

Powder metallurgy process

  1. First, metal powder is filled into the mold and leveled evenly against the mold surface.
  2. The powder is then leveled on the mold surface.
  3. The metal powder is compacted through stamping.
  4. The compacted object is not yet a semi-finished product; accidental impacts or drops will cause it to break.
  5. The compacted metal powder is then fused together in an oven at a high temperature of 800°C to 2,500°C to form a complete piece.
  6. After fusion, it becomes a high-hardness finished product.

Commonly used powder ingredients

The range of powder materials used in powder metallurgy is extensive, mainly including the following:

Advantages and disadvantages of powder metallurgy

Advantages

  • Material savings and cost reduction: 

  • Metal loss rate is only 1%–5% (compared to up to 80% in traditional casting), and most parts can be directly molded, significantly reducing or eliminating subsequent machining.
  • Suitable for mass production: 
  • Ideal for manufacturing small, precision parts with similar shapes and high demand, such as gears, bearings, cams, and lock parts.
  • Can process special and refractory materials: 
  • Capable of manufacturing high-melting-point metals such as tungsten and molybdenum, or "pseudo-alloys" and porous materials that cannot be mixed using conventional melting methods (such as self-lubricating bearings).
  • Uniform composition and structure: 
  • Without a liquid melting process, precise chemical composition ratios and uniform distribution are ensured.

Disadvantages

  • Porosity and Lower Strength: 
  • The internal structure of the product contains tiny pores, resulting in mechanical strength and toughness that are typically 20%–30% lower than forgings or castings.
  • Limited Shape and Size: 
  • Because metal powder has less fluidity than liquid metal, it is inconvenient to manufacture overly complex three-dimensional structures, thin-walled parts, or large components (highly complex shapes require metal powder injection molding (MIM)).
  • High Mold and Equipment Costs: 
  • Pressing requires extremely high pressure, leading to expensive large-scale pressing equipment; furthermore, the high cost of mold manufacturing makes it uneconomical unless for large-scale production.
  • Poor Corrosion Resistance: 
  • Due to the porous structure, it is more prone to corrosion without surface protection or impregnation treatment.
Share